Falcon Series Robot aim

a professional manufacturer for injection molding machine and peripheral equipments. DetailHigh-speed take outDry take out time: 0.5sec/ Dry cycle time: 2.6sec.Falcon series is applicable to IMM under 350ton for taking out quick-formed products. Take-out at super high-speed(0.5sec.) and dry cycle time within 2.6seconds. It is applicable for all thin-wall formed products and the dry cycle time within 6seconds. It has ranges of model F900S1/F900S2/F1500S1/F1500S2. Side-Entry stroke: 900~1500mm, you can choose AC servo motor driven on one axis or 2axes. To take-out at high-speed increases output greatly.Structure Feature: AC servo motor driven on both two axes can take-out variety depth products; Or AC servo motor driven on one axis is optional for take-out thin wall products, such as CD-case.High rigidity 3D structure design, stable construction, low vibration, longwearing and long-life.Using special high precision high speed linear slide rail, wearproof, heatproof, long-life and not deformed.Arm with high rigidity aluminum beam, light mass, high rigidity, cooperated with double-speed belt construction ensured the take-out time.AC servo motor driven on single axle, crosswise axis can choose mechanically to adjust operation with mold open position.T type steel wire PU belt driven, good stability, precision position at 0.1mm.Control System: With AC servo motor and driver, ensure longwearing and high performance.PLC control system, strong ability of anti-interference, stable production and fast counting.Big touch type screen, it’s easy to set and use.Automatically defecting, displaying and recording the failures. Convenient to maintain and problem solving.CE models are available, conforming with EUROMAP 12 or EUROMAP 67 standard, enclosed standard connect interface for connecting with IMM.Fifty groups of molding memorizing function, it can be set fast while exchanging the mold, convenient for production and increased efficiency.SpecificationGeneral specification:

Power source	Working pressure	Max. allowed pressure	Drive system	Swivel	Control system
3øAC220v±10v50/60HZ	5kgf/cm20.49Mpa	8kgf/cm20.8Mpa	X/YAC SERVO MOTOR	90°FixedPneumatic	Mitsubishi servo controller

Main specification:

Model	FA900S1	FA900S2	FA1500S1	FA1500S2
Power capacity(KVA)	4	5	5	6
Recommended IMM (ton)	50-200	50-200	200-350	200-350
Side entry stroke (mm)	900	900	1500	1500
Crosswise stroke (mm)	fixed50-500(adjustable)	150-500	fixed200-700(adjustable)	200-700
Max. loading(kg)	2	2	3	3
Dry take out time(sec)	0.35	0.35	0.5	0.5
Dry cycle time(sec)	2.2	2.2	2.6	2.6
Air consumption (NI/cycle)	4	4	5	5
Net weight(kg)	200	210	380	390

Maximum addition to side-entry stroke to command is as follows:1000mm for FA900,1650mm for FA1500 Measuring reference for picking time under idle cycle is :assuming that every delay set to be 0,a full side entry stroke ,non horizontal stroke of reach. However, actual picking time depends on practical conditions so the data mentioned above are not guaranteed.

Falcon Series Robot aim